Honda Accord 2013 2014 2015 Oil Maintenance Light Reset

How do you reset the oil light on a 2013 2014 2015 Honda Accord?

This is instructions about how do you reset the oil light on a 2013 2014 2015 Honda Accord

The Oil Maintenance Light Reset for Honda Accord 2013 2014 2015 will need to be performed only after every oil change.

The procedure to reset the oil light on a Honda Accord on new or late models differs from that of older models. It’s easy to learn how.

For that follow the steps below to reset the oil life monitor or oil maintenance light reset after each oil change Honda Accord 2013 2014 2015.

This is the procedure for Oil Change Light Reset

1. Turn the ignition to the “RUN” position.
2. Press the up and down arrows until “VEHICLE SETTINGS” is displayed and press the “SEL/RESET” button.
3. Press the up and down arrows until “MAINTENANCE RESET” is displayed.
4. Press the “SEL/RESET” button and the oil life reset mode will be displayed.
5. Use the up and down arrows to select “RESET” and press the “SEL/RESET button.
6. Display will disappear and oil life will be reset to 100%.
7. Turn the ignition off.

This is the procedure without multi-information display for oil change light Reset Honda Accord 2013 2014 2015

1. Turn the ignition to the “RUN” position.
2. Press the “SELECT/RESET” knob until the enigne life indicator is displayed.
3. Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the maintenance code(s) will blink.
4. Press the “SELECT/RESET” knob for 5 more seconds, the maintenance code(s) will disappear and oil life will be reset to 100.
5. Turn the ignition off.

How To Reset Oil Life In Honda Accord 2008-2017

1. Put on the ignition (If your vehicle has an ignition button, press the POWER button twice without stepping on the brake pedal)
2. Go to the OIL LIFE screen (So once we do that you’re going to scroll to the Oil Life screen by pressing through the Select/Reset knob on the instrument cluster)
3. Hold down the Select/Reset knob (Now you’re going to hold the Select/Reset knob for 10 seconds and basically, it puts it into a kind of mode where you can reset it. And once you do it the oil life going to start blinking)
4. Release and hold the Select/Reset knob again (Finally, once the oil life starts blinking what we’re going to do is hit the knob for five seconds more and the oil life will reset to 100%)

Note: Please make sure you follow the vehicle owner’s manual to check the oil level and change oil if it’s required. resetting the indicator light doesn’t change the actual oil level or quality, it only resets the indicator light for Honda Accord 2013 2014 2015.