2008-2010
Turn the ignition on without starting the engine (press START/STOP) button.
Locate TRIP computer switches on the right side of the instrument panel (Square and Circle buttons).
Press Square (button) repeatedly to bring up the “Setting” screen on the instrument panel display.
Follow the prompts to select the “Maintenance” menu. Once this menu is accessed follow the prompts to set or reset the “Engine Oil”.
Repeat and follow prompts to reset “Oil Filter”.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to run (one position before starting engine).
Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2003
Turn the ignition to run (one position before starting engine).
Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display.
Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear on the display for 10 seconds to let you know the system is reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2007
Turn the ignition to run (one position before starting engine).
Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC by pressing the (i) button.
Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2000-2005
Turn the ignition off.
Press and hold the TRIP METRE RESET button while you turn the ignition switch to run (one position before starting engine).
Continue holding the button until the indicator resets (indicator light goes out).
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006
Turn the ignition to run (one position before starting engine).
Press the TRIP button until the engine oil life indicator is displayed.
Press the trip button for more than 10 seconds. The engine oil life indicator and the maintenance items code(s) will blink.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine).
Press the TRIP button until the engine oil life indicator is displayed.
Press the trip button for more than 10 seconds. The engine oil life indicator and the maintenance items code(s) will blink.
Press the TRIP button for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to “100”.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2008
Turn the ignition to run (one position before starting engine).
Press the SELECT button repeatedly until the engine oil life display or the service message is displayed.
Press the RESET button for about 10 seconds. You will see a “MAINT RESET” message.
Select the appropriate answer, “MAINT RESET N” (NO) OR “MAINT RESET Y” (YES) by pressing the SELECT button repeatedly. “N” or “Y” is displayed on the outside temperature display.
Select the ëëMAINT RESET Yíí (YES), and press and hold the RESET button again to reset the engine oil life to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2009-2010
Turn the ignition to run (one position before starting engine).
Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.
Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Recent Comments