Audi A2 (2000-2005), A3 (2000-2003), A6 2000 to 2004)
For Fixed Interval servicing, you can use the following procedure:
Start with the ignition turned OFF
Press and hold the button on the right side of the display while turning the ignition on (position 2)
“SERVICE IN xxx Miles / Kilometres” or “SERVICE !” should be displayed on the dashboard
Release the button on the right
To reset on the existing service schedule, press and hold the button on the left side of the display until the NEW distance or time value appears
Release the button on the left
Turn off the ignition
Audi A3 (2003-2009)
For Fixed Interval servicing, you can use the following procedure:
Start with the ignition turned ON (position 2), but with the engine OFF
Pull out and hold the button on the right side of the display until “SERVICE” appears on the display
Release the button on the right, then within 5 seconds pull the button out and hold it again
Release the button when the display shows “- – -” or “SERVICE IN xxxx Miles / Kilometres, xxxx days”
Turn off the ignition
Audi A4 (2001-2007)
For Fixed Interval servicing, you can use the following procedure:
Below and to the right of the speedometer are three buttons – the right-hand button of these three is usually labelled “0,0”, and the centre button labelled with a spanner/wrench symbol.
Start with the key in, but the ignition turned OFF
Press and hold the Spanner button, while turning the ignition on (position 2)
Release the Spanner button
“SERVICE” should now appear on the display
Press and hold the 0,0 button until the display shows “SERVICE IN xxxx Miles / Kilometres”
Release the 0,0 button, then turn off the ignition
Audi A8 (1994-2004)
Towards the bottom-right corner of the instrument cluster there should be a button labelled “0,0”
Start with the key in, but the ignition turned OFF
Press and hold the 0,0 button, while turning the ignition on (position 2)
Release the 0,0 button
“SERVICE” should now appear on the display
Press and hold the 0,0 button until the display shows “SERVICE IN xxxx Miles / Kilometres”
Release the 0,0 button, then turn off the ignition
For Fixed Interval servicing, you can use the following procedure:
Start with the key in, but the ignition turned OFF
Press and hold the button on the right of the display, while turning the ignition one click (to position 1)
Release the button on the right
“SERVICE” should now appear on the display
Press and hold the button on the left of the display until it shows “SERVICE IN xxxx Miles / Kilometres”
Release the left button, then turn off the ignition
Recent Comments